Phone

Phone : 62 21-2205 2205 Mobile : 62 819 7716 8000

sales@alvasta-tech.com

VigorSwitch P2540xs

www.alvasta-tech.com / Enterprises / DrayTeK / Switches / All Switches / VigorSwitch P2540xs /

VigorSwitch P2540xs

An Ideal Core Switch for SME/SMB

DrayTek VigorSwitch P2540xs is a Layer 2+ Managed 10 Gbps switch. With 48x Gigabit Ethernet PoE+ ports providing 400W power budget and 6x SFP+ 10Gbps Fiber links. Supporting advanced Layer 3 features, DHCP Server and VLAN Routing, VigorSwitch P2540xs improves network efficiency and helps your LAN network to work continuously even when the gateway is offline, which is ideal to be placed as the core switch in SME/SMB.

1. Power Socket

2 . Reset Button

3. LED Indicator

4. 48x PoE/PoE+ Gigabit Ethernet

5. 6x SFP+ Port

6. Link/PoE LED Slide Switch

7. Console Port

Key Features

	PoE (Power over Ethernet) Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.		QoS (Quality of Service) Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
	Ping Device Check Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.		10G SFP+ Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.
	Auto Surveillance & Voice VLAN Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.		IPv6 Ready VigorSwitch P2540xs supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
	ONVIF-Friendly Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance.		Web-Based GUI Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status.
	Wire-Speed VLAN Routing Improve overall network performance by using VigorSwitch P2540xs to route the inter-VLAN traffic directly and offload the router.		Multiple Admin Accounts Multiple Admin accounts with two levels of administrator privilege.
	IP Conflict Prevention Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.		Central Switch Management Set up VLAN easily from the router and get a centralized hierarchy view of the switches.
	Access Control VigorSwitch P2540xs supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.		Energy-Efficient Ethernet Compliant with IEEE 802.3az to reduce power consumption.

Advanced Layer 2+ Features

DHCP Server & VLAN Routing

Improving LAN Network Sustainability and Efficiency,
with or without a Router

In a large LAN network, much traffic doesn’t go to Internet, but to the servers in LAN. For example, IP cameras store videos to NVR, IP phones register to PBX, clients access to file server, etc.

L2+ switch with DHCP server and VLAN routing functionalities, as the device receiving traffic before the router, is ideal to share the loading of your router and to help your LAN network to work continuously even when the router is offline.

As a DHCP server, VigorSwitch assigns dynamic IP addresses for up to 8 VLANs. With VLAN routing, VigorSwitch supports up to 512 routes.

Bind IP to MAC

Reserve an IP Address for an Important Device

As a DHCP Server, layer 2+ VigorSwitch helps reserving IP addresses for your important devices that most users will access frequently.

ONVIF-Friendly

Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.

Centralized Hierarchical View

VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.

Images Viewing

Images filmed by IP cameras can be viewed directly on VigorSwitch.

Device Management

Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.

ONVIF Snapshot Alert

Locating Not-Responding Cameras Made Easy

It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.

To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.

With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.