802.3bt PoE++ 60-watt Power over 4-pair UTP Solution
As PLANET GUP-805A-60W adopts the IEEE 802.bt PoE++ standard technology, it is capable to source up to 60 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). Its power capability is three times more than that of the conventional 802.3at PoE+ and it is an ideal solution for those high power consuming network PDs, such as:
With a total power budget of up to 60 watts for different kinds of PoE applications, the GUP-805A-60W provides a quick, safe and higher 802.3bt PoE++ network solution for small businesses and enterprises.
Model | PoE Standard | PoE Budget | LAN Port Speed | SFP Slot Speed |
GUP-805A-60W | IEEE 802.3af/at/bt | 60 watts | 10M/100M/1000Mbps | 100M/1000BASE-X |
High Performance and Steady Network Communications Guaranteed Despite Distance Extension
The GUP-805A-60W extends communication distance with high Gigabit performance via SFP slot and SFP transceiver. The GUP-805A-60W provides media conversion between 10/100/1000BASE-T and 100/1000BASE-X interfaces for various fiber optic applications. The available SFP LC fiber interfaces are shown below:
Optic Mode | Connector Type | Distance |
Multi-mode | Duplex LC | 220m/550m/2km |
Single mode | Duplex LC | 20/40/60/80/120km |
Single mode WDM | Simplex LC | 2/10/20/40/80/120km |
802.3bt PoE++ and DIP Switch for PoE Power Output Mode Options
To meet the demand of various powered devices consuming stable PoE power, the GUP-805A-60W provides one DIP switch for multi-PoE operation modes that include 60-watt 802.3bt type-4 PoE++ mode, UPOE and legacy mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.
PoE Mode | Function |
BT | This mode fully supports IEEE 802.3af/at/bt standards. |
UPOE | This mode fully supports Cisco UPoE standards or PoH standards. |
Legacy | The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard. This protects against damage to the PDs as the right PoE mode is applied. |
Ordering Information | |
---|---|
GUP-805A-60W | 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3bt PoE++ Media Converter (60 Watts) |
Need support, click here