KVM Solution-222641

Product Features

• Extension Distances: flexible resolution versus extension distance options, ranging from 150m (500ft) extension distance for a single 1920 x 1080 screen to 100m (330ft) extension distance for a single 1920 x 1200 screen
• Transparent USB 2.0 (Low, Full, High Speed): for a whole range of USB devices including keyboards, mice, tablets, touch screens and mass storage devices, connected via the built-in 4-port USB hub
• Perfect digital video, real time control: uncompressed video extension with every pixel of every frame transferred with zero loss and in real-time
• Single CATx extension cable; shared by video, USB 2.0, audio and RS232 signals; RS232 can be passed between the units to a maximum baud rate 115K2 via the options port. Adder’s RC4 remote key switch is also supported
• Plug and Play: straightforward installation with no need for extra drivers or software
• Locking power connectors: locking 3 Pin DC jack with 2 power adaptors included
• CD quality analog audio: stereo channel 16bit sampled at 44.1kHz is available to transfer stereo audio from local to remote for Line Out
• Intelligent operation, compatibility and future-proofing: EDID (Extended Display Identification Data) allows the true characteristics of the monitor to be passed back to the computer; KVM switch mode for optimal KVM device compatibility; complete system is flash upgradeable from the computer end
• Space-saving rackmount kit: easy-access 19” rack mounting kit with two units per 1U of rack space

Specification

Approvals / Compliance

• CE
• FCC

Standards

Hardware compatibility

All computers with DVI, USB and audio

DVI Interface

The system supports resolutions to a maximum of 1920x1200@60Hz.

USB 2.0

Supports USB 2.0 devices (Low, Full and High speed). Isochronous devices are supported

Cable Guidelines

Important extension distance Information

For resolutions over 1920 x 1080 the recommended cables are CAT7 shielded foiled twisted pairs: Daetwyler 7702 Flexible patch cable / Daetwyler 7120 Bulk cable.

CAT5e (or better) shielded twisted pair cable is recommended for resolutions of 1920 x 1080 and below and must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

Note: Distances are achieved using single lengths of trunk/bulk cable with two 2m CAT7a patch cables

Environmental

0 to 40ºC / 32 to 104ºF

Connectors – Local Unit

Computer connections LOCAL transmitter

DVI , audio 3.5mm in, USB type B, RS232 10p10c options port, mini USB for firmware upgrade

Peripheral connections REMOTE receiver

DVI, audio 3.5mm out, USB type A x 4, RS232 10p10c options port

Mechanical

Local Unit:

Physical design

Compact case, robust metal construction

169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d)

600g/1.3lbs

Power

3 Pin Locking DC jack (2 x power adapter included), 100-240V AC 50/60Hz, 0.7A, input to power adapter, 12V DC 18W output from power adapter

Software

All known operating systems