VT300 Vehicle Tracking Gateway Cable

Applicable Model         

Cable

Order Code      

Specification

VT310

26 PIN All-in-one Test Cable

The cable has P1 and P2 ends:
P1 is 26PIN female, connected toVT310;
P2 is open end, which requires a 9-48V adaptor.
Suitable for engineering environments and indoor tests.    

VT310

SCAB000231

The cable has P1, P2 and P3 ends:
P1 is 26PIN female connected toVT310;
P2 is OBD-II male connected to the vehicle;
P3 is ignition signal terminal connected to the ignition on/off.
Suitable for heavy trucks with OBD-II vehicle diagnostic interfaces,
and powers VT310 through interfaces.

VT310

This cable has P1, P2, P3 and P4 ends:
P1 is 26PIN female connected to VT310;
P2 is OBD-II male connected to the vehicle;
P3 is open end that includes I/O, RS232-1 and 1-Wire;
P4 is ignition signal terminal connected to the ignition on/off.
Suitable for heavy trucks with OBD-II vehicle diagnostic interfaces,
and powers VT310through interfaces. Recommended for
customers who need DI, DO, AI, 1-Wire devices or vehicle-mounted controllers.

VT320

SCAB000370

The cable has P1 and P2 ends: P1 is 26PIN female, connected to VT320;
P2 is open end, which requires a 9-48V adaptor.
Suitable for engineering environments and indoor tests.

VT320

SCAB000399

OBD 16PIN interface test line,Cable standard UL2464,wire length 1500mm

VT320

SCAB000409

J1939 6PIN interface test line,Cable standard UL2464, wire length 1500mm

VT320

J1939 9PIN interface test line,Cable standard UL2464, wire length 1500mm