Safety
Smart grid equipment is subject to Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC). Equipment must prevent electromagnetic radiation interference to, and from other facilities, and also mitigate the influence of electromagnetic waves to human health.Reliability
Substation automation system (SAS) continues operating when single communication component breaks down.Industrial wireless
Wireless technologies to enable connected devicesEMC
Emission, Susceptibility, and Path are the three constituents of EMC, with emission being the one causing the most incompatibilities, while yielding the greatest number of solutions. Susceptibility on the other hand, is more subtle in its effect and its solutions. Finally, the Path can be the arbiter of both.Thermal analysis
By using thermal simulation software, Winmate can analyze real-world thermal problems easily, quickly and accurately. With a new breed of Computational Fluid Dynamics (CFD) tools, this simulation is based on the same mathematical foundation as traditional CFD software but is easy to use. We use well-defined thermal analysis procedures to verify our systems to meet the harsh environment applications. Especially in fanless cooling design, we develop heat-sink or heat-pipe solution to conduct the heat and the air flow for the best thermal solution. We provide dedicated thermal analysis technology by using thermal analysis software. Before production, we use Infrared thermal video system (TVS) to check if our thermal design works.| Before thermal improvement | After thermal improvement |
 |  |
Thermal profile test
It is to check the thermal profile of the test unit, and also test if the test unit can work under different environment temperatures condition. Reference IEC 60068-2-2 Testing procedures, Test Bb: Dry Heat Test.Wide temperature range
Winmate provides products to deliver optimum performance over a wide range of temperatures in order to accommodate for diverse industrial applications such as outdoor kiosks in winter and summer (In generally test condition, real case should depend on your mechanical selection). At the high temperature condition, the mechanism maintains the power switch to protect from overheating. The power will turn off when over 65 degrees C, and will back to turn on status when the internal temperature drop back to 55 degrees.Vibration and shock resistance
Following the different demands of anti-shock and vibration in all different kinds of applications, we can provide different grades of shock or vibration standards for our product range. Products that meet the standard could maintain its operation under severe environments.Vibration Test
The purpose of vibration test is to check the mechanical resonance in all 3 directions (X, Y and Z). With the testing result our mechanical engineers can optimize the design and make the product most reliable for the usage. During and after this procedure the product needs to be 100% functional and no mal-function.
Shock Test
The purpose of shock test is to check how rugged the design is in all 3 directions (X, Y and Z). With the testing result our mechanical engineers can optimize the design and make the product most reliable for the usage. During and after this procedure the product needs to be 100% functional and no mal-function.
Drop Test
The drop test is to test the product in the box is 100% workable and intact the drop.
Safety
CE, FCCEMC, EMI
IEC 61850-3EC 61850-3 is a standard that outlines a comprehensive safety framework for substation automation, transmission & delivery (T&D) automation, and smart grid application. The standard emphasizes the EMI immunity and environmental requirements for communications networks. The product that meets the IEC 61850-3 standard provides full-range, redundant power supply which ensures the high quality of electricity transmission.
