SATADOM-ML 3IS2-P

SATADOM 16GB ~ 128GB Features High IOPS to reduce boot up timing Cable-less through Pin 7 / Pin 8 connectors Anti-vibration mechanical design Built in iData Guard Hardware Write Protection supported Cost-effective Flash with iSLC High less than 1U Supports wide temperature from -40°C to 85°C

BORN FOR SUPERIOR PERFORMANCE

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3IS2-P is designed as the  mallest form factor size that could enhance compatibility with various design applications.

Innodisk SATADOM-ML 3IS2-P is designed for server field. The high of the SATADOM suit for 1U(44.5mm) high server, allow it to fit seamlessly into any server setup. Besides, the main benefit is going to be the ability to use a SATA boot device without using a drive bay.

The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on a customer’s system without an additional power cable. Besides, the boot time and power consumption are lower than those of a hard disk drive (HDD), and it operates reliably in harsh environments while complying with the ATA protocol. No additional drives are required, and the SSD can be configured as a boot device or data storage device.

SPECIFICATIONS

ORDER INFORMATION

*PN end with A : Pin 8 + power cable / B : Pin 8 + Pin 7

For more information, please contact our support.

Need support, click here